2019 Porsche Cayenne 9YO: Difference between revisions

Jump to navigation Jump to search
No edit summary
Line 74: Line 74:
</hovergallery>
</hovergallery>


=== Puddle Lights ===
=== Load Management 2 ===
<br/>
This is actually a relatively straight-forward bit of work, though the carpet strips that need to be remvoed are a little delicate, so if you want to reuse those proceed with caution and don't pull too hard.  First, take the removeable cover out and set it aside, and lower the back seats.  You'll need a T40 Torx bit, which is harder to find (though my Lowes had them).  Flip the tie downs open, flip the covers up, and remove them.  The long carpet srips in the side channels come out easily, just gently push them towards the front of the car and the pop out.  The 4 end pieces have a tab that points towards the open section of the channel, hold that down and push towards the open side and they'll pop out.  Then, just remove the center bolt and the load rails will drop right end.  Tightn them up, and replace the cover.  Then just drop in the load anchors and arrange to taste.<br/>


<hovergallery maxhoverwidth=1200 maxhoverheight=1024>
<hovergallery maxhoverwidth=1200 maxhoverheight=1024>
Image:  
Image:Load Cover 1.jpg|Before starting the conversion
Image:  
Image:Load Cover 2.jpg|Cover removed
Image:  
Image:Load Strip 1.jpg|Track edge before removing factory tie down and carpet inserts
Image:Load Tie 2.jpg|Tie Down from Factory
Image:Load Tie 1.jpg|Tie Down open
Image:Load Tie 3.jpg|Tie Down cover open/bolt exposed
Image:Load Tie 4.jpg|Tie Down removed
Image:Load Strip 2.jpg|After Tie Down removal
Image:Load Strip 3.jpg|Closeup
Image:Load Strip 4.jpg|Carpet removed
Image:Load Strip 5.jpg|Center bolt to be removed
Image:
Image:Load MGMT 1.jpg|Finished with rigid grocery bar across back and retractable web on side
</hovergallery>
</hovergallery>



Revision as of 17:47, 7 February 2021

2019 Porsche Cayenne

Purchase Pictures

This is Elizabeth's new car, kind of a reward for getting a promotion at work.

Exterior

Interior

Load Management 2

This is actually a relatively straight-forward bit of work, though the carpet strips that need to be remvoed are a little delicate, so if you want to reuse those proceed with caution and don't pull too hard. First, take the removeable cover out and set it aside, and lower the back seats. You'll need a T40 Torx bit, which is harder to find (though my Lowes had them). Flip the tie downs open, flip the covers up, and remove them. The long carpet srips in the side channels come out easily, just gently push them towards the front of the car and the pop out. The 4 end pieces have a tab that points towards the open section of the channel, hold that down and push towards the open side and they'll pop out. Then, just remove the center bolt and the load rails will drop right end. Tightn them up, and replace the cover. Then just drop in the load anchors and arrange to taste.

Load Management


Charging Dock