2019 Porsche Cayenne 9YO: Difference between revisions
No edit summary |
|||
Line 74: | Line 74: | ||
</hovergallery> | </hovergallery> | ||
=== | === Load Management 2 === | ||
<br/> | This is actually a relatively straight-forward bit of work, though the carpet strips that need to be remvoed are a little delicate, so if you want to reuse those proceed with caution and don't pull too hard. First, take the removeable cover out and set it aside, and lower the back seats. You'll need a T40 Torx bit, which is harder to find (though my Lowes had them). Flip the tie downs open, flip the covers up, and remove them. The long carpet srips in the side channels come out easily, just gently push them towards the front of the car and the pop out. The 4 end pieces have a tab that points towards the open section of the channel, hold that down and push towards the open side and they'll pop out. Then, just remove the center bolt and the load rails will drop right end. Tightn them up, and replace the cover. Then just drop in the load anchors and arrange to taste.<br/> | ||
<hovergallery maxhoverwidth=1200 maxhoverheight=1024> | <hovergallery maxhoverwidth=1200 maxhoverheight=1024> | ||
Image: | Image:Load Cover 1.jpg|Before starting the conversion | ||
Image: | Image:Load Cover 2.jpg|Cover removed | ||
Image: | Image:Load Strip 1.jpg|Track edge before removing factory tie down and carpet inserts | ||
Image:Load Tie 2.jpg|Tie Down from Factory | |||
Image:Load Tie 1.jpg|Tie Down open | |||
Image:Load Tie 3.jpg|Tie Down cover open/bolt exposed | |||
Image:Load Tie 4.jpg|Tie Down removed | |||
Image:Load Strip 2.jpg|After Tie Down removal | |||
Image:Load Strip 3.jpg|Closeup | |||
Image:Load Strip 4.jpg|Carpet removed | |||
Image:Load Strip 5.jpg|Center bolt to be removed | |||
Image: | |||
Image:Load MGMT 1.jpg|Finished with rigid grocery bar across back and retractable web on side | |||
</hovergallery> | </hovergallery> | ||
Revision as of 16:47, 7 February 2021
2019 Porsche Cayenne
Purchase Pictures
This is Elizabeth's new car, kind of a reward for getting a promotion at work.
Exterior
Loading - wrong truck 1
Loading - wrong truck 2
Loading right truck 1
Loading right truck 2
Loading right truck 3
Interior
Load Management 2
This is actually a relatively straight-forward bit of work, though the carpet strips that need to be remvoed are a little delicate, so if you want to reuse those proceed with caution and don't pull too hard. First, take the removeable cover out and set it aside, and lower the back seats. You'll need a T40 Torx bit, which is harder to find (though my Lowes had them). Flip the tie downs open, flip the covers up, and remove them. The long carpet srips in the side channels come out easily, just gently push them towards the front of the car and the pop out. The 4 end pieces have a tab that points towards the open section of the channel, hold that down and push towards the open side and they'll pop out. Then, just remove the center bolt and the load rails will drop right end. Tightn them up, and replace the cover. Then just drop in the load anchors and arrange to taste.
Load Management
Charging Dock